Sony Ericsson PDW-530P Manuel D’Utilisation
Ch
apt
apt
er 8
Se
tt
ing
Up
the Camc
Up
the Camc
or
der
117
8-2 Adjusting the Viewfinder
8-2-5 Using the BKW-401
Viewfinder Rotation Bracket
By fitting a BKW-401 Viewfinder Rotation Bracket (not
supplied), you can rotate the viewfinder out of the way so
that your right leg does not hit the viewfinder while you are
carrying the camcorder.
supplied), you can rotate the viewfinder out of the way so
that your right leg does not hit the viewfinder while you are
carrying the camcorder.
Using the BKW-401 Viewfinder Rotation Bracket
To fit the BKW-401 to the camcorder, proceed as follows.
1
Turn the arm of the rotation mechanism assembly of
the BKW-401 in the direction of the arrow in the
following illustration. Next, using a hexagonal wrench
3 mm across flats, remove the bolts (M4
the BKW-401 in the direction of the arrow in the
following illustration. Next, using a hexagonal wrench
3 mm across flats, remove the bolts (M4
× 8), to
separate the rotation mechanism assembly from the
viewfinder front-back positioning mechanism
assembly.
viewfinder front-back positioning mechanism
assembly.
2
Remove the two M3
× 10 hexagon socket bolts from
the front-back positioning mechanism assembly,
together with the washers. Take care not to lose these
bolts and washers.
together with the washers. Take care not to lose these
bolts and washers.
3
Using a hexagonal wrench 2.5 mm across flats, detach
the viewfinder shoe from the camcorder body.
the viewfinder shoe from the camcorder body.
4
Using the two bolts (M3
× 10) and washers removed in
step 2, attach the rotation mechanism assembly of the
BKW-401 to the camcorder.
BKW-401 to the camcorder.
8-2-6 Detaching the Eyepiece
Removing the eyepiece gives a clearer view of the screen
from further away. It is also easy to remove dust from the
viewfinder screen and mirror when the eyepiece is
detached.
from further away. It is also easy to remove dust from the
viewfinder screen and mirror when the eyepiece is
detached.
1
Turn the eyepiece locking ring fully counterclockwise,
to align the red marks on the locking ring and the
viewfinder barrel.
to align the red marks on the locking ring and the
viewfinder barrel.
2
Detach the eyepiece.
Hexagon socket bolts
(M3
(M3
× 10)
Red mark
Locking ring
Line up the red marks.
Red mark