Samsung BD-J7500 Manuel D’Utilisation

English

Settings

|NOTE |

To view the password as you enter it, use the arrow

buttons to select Show Password on the right side, and

then press v button.

7. When finished, select Done and then press

the v button. The product verifies the

network connection and then connects to the

network.

8. When verification is complete, select OK, and

then press the v button.

|NOTE |

You should be able to find the Security Code or Pass

Phrase on one of the set up screens you used to set up

your router or modem.

Wireless - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.
1. Follow the directions in Wireless - Automatic

through Step 5.

2. The product searches for a network, and

then displays the connection failed message.

3. On the bottom of the screen, select IP

Settings, and then press the v button.

The IP Settings screen appears.

4. Select the IP Settings field, and then press

the v button.

5. Select Enter manually in the IP Settings

field, and then press the v button.

6. Select a parameter to enter (IP Address, for

example), and then press v button. Use

the number keypad on your remote control to

enter the numbers for the parameter. You can

also enter numbers using the ▲▼ buttons.

Use the ◄► buttons on the remote control

to move from entry field to entry field within a

parameter. When done with one parameter,

press the v button.

7. Press the ▲ or ▼ button to move to another

parameter, and then enter the numbers for

that parameter following the instructions in

Step 6.

8. Repeat Steps 6 and 7 until you have filled in

all parameters.

|NOTE |

You can get the Network parameters from your Internet

provider.

9. When finished, select OK, and then press the

button. The Security Screen appears.

10. On the Security screen, enter your network's

Security Code or Pass Phrase. Enter

numbers directly using the number buttons

on your remote control. Enter letters by

selecting a letter with the ▲▼◄► buttons,

and then pressing the v button.

11. When finished, select Done at the right of the

screen, and then press the v button.

The product verifies the network connection

and then connects to the network.

12. After the product verifies the network, select

OK, and then press the v button.

WPS(PBC)

1. In the Home screen, select Settings, and

then press the v button.

2. Select Network, and then press the v

button.

3. Select Network Settings, and then press the

button.

4. Select Wireless in the Network Settings

screen, and then press the v button.

5. Press the ▲ button on your remote, and then

press the ► button to select WPS(PBC).

6. Press the v button on your remote. The

"Press the PBC button on your wireless

router within the next two minutes." message

appears.

7. Press the WPS(PBC) button on your router

within two minutes. Your product automatically

acquires all the network settings values it

needs and connects to your network.

The Network Status screen appears.

The product connects to the network after

the network connection is verified.