Samsung BD-J7500 Manuel D’Utilisation

  English

 |NOTES |

 

The upgrade is complete when the product turns off, and 

then turns on again by itself.

 

Samsung Electronics takes no legal responsibility for 

any product malfunction caused by an unstable Internet 

connection or consumer negligence during a software 

Update.

 

If you want to cancel the upgrade while the upgrade 

software is downloading, press the v button.

 

When a system upgrade is in progress, "UPDATE" is 

displayed on the front panel.

Update now

You can use Update now to update the software 

through your network connection or by using a 

USB flash drive. The network instructions are 

below. The USB flash drive instructions are in the 

next column.

1.  Select Update now, and then press the 

 

button. 

The Update now pop-up appears.

2.  The product searches on line for the latest 

software version.

3.  If it finds a new version, the Update Request 

pop-up appears.

4.  Select Yes. The product upgrades the 

software, turns off, and then turns on 

automatically.

5.  If you do not select Yes or No in one minute, 

the product stores the new upgrade software. 

You can upgrade the software later using 

Auto Update.

6.  If you select No, the product cancels the 

upgrade.

 |NOTES |

 

When the system upgrade is done, check the software 

details in the Product Information section of the Contact 

Samsung screen.

 

Do not turn off the product during the Software Update.  

It may cause the product to malfunction.

Auto Update

You can set the Auto Update function so that the 

product downloads new upgrade software when it 

is in Auto Update mode. 

This allows the product to download upgrade 

software automatically, when you are not using it.
1.  Press the ▲▼ buttons to select Auto 

Update, and then press the 

 button.

2.  Select On / Off.

 |NOTE |

 

To use the Auto Update function, your product must be 

connected to the Internet.

Update by USB

To upgrade by USB, follow these steps:
1.  Visit www.samsung.com.
2.  Click OWNERS & SUPPORT > MANUALS & 

DOWNLOADS on the top right of the page.

3.  Enter the product's model number into the 

search field. As you enter the model number, 

a drop down will display products that match 

the model number.

4.  Left click your product's model number in the 

drop down list.

5.  On the page that appears, click Downloads.
6.  Find Upgrade File (USB type) under 

Description.

7.  Click the ZIP button in the File column on the 

right side of the page.

8.  Click Send in the pop-up that appears to 

download and save the firmware file to your 

PC.