AT&T 3 Manuel D’Utilisation
Removing the Cover
Removing the Cover
1.
Using a Phillips®-head screwdriver, loosen the four cover screws (see
Figure 7-3).
Figure 7-3).
Cover Screws
Cover Screws
Figure 7-3. Removing the Cover Screws
2.
Slide the cover back slightly to release the slip-clasp that holds the cover
to the chassis frame (see Figure 7-4).
to the chassis frame (see Figure 7-4).
Slip-clasp
Figure 7-4. Removing the Cover
3.
Carefully lift the cover up, remove it from the chassis, and set it aside.
7-4
Upgrading the System