SVAT Electronics CV301-8CH Manuel D’Utilisation

CV301-8CH

now you can see

Selecting this shortcut prompts the video search menu to appear. This allows you to search through the previously 

recorded footage. 

For more information on the video search menu, please see PLAYBACK. 

The controls for the PTZ camera are as follows: 
Slow Fast: 

This bar allows you to adjust the speed that 

the camera will move 

Zoom:  

Pressing the + zooms in and pressing the – 

zooms out 

Focus:  

Pressing the + focuses the picture and 

pressing the – takes the focus away. This is 

useful if an object is either close range or long 

range and is being displayed blurry

Iris:  

Pressing the + lets in more light and pressing 

the – takes light out of the picture. This is 

useful for varying lighting situations as well as 

correcting backlight issues

Cruise Setup:  

This function allows you to setup preset 

positions for the PTZ to follow, the PTZ camera 

will cruise through your set positions and 

times. Not all PTZ cameras have this function

Directional keys:   Clicking on the directional arrows moves the 

camera in the direction of that arrow

To set up cruise: 
1.  Right click the mouse and open PTZ. 
2.  Select “Cruise Set”. 
3.  Select the channel that the PTZ camera is connected to. (The 

PTZ camera must already be configured).

4.  Use the directional buttons to adjust the camera to the places 

you would like the PTZ camera to view in cruise mode. Press 

the SET button at each desired position. 

5.  Click on stop time and set the time (in seconds) for how long 

you would like the PTZ camera to stay at each position. 

6.  To review your set points, select the current point you would 

like to view and click on “go to”. 

7.  Click “save” and then “exit”. 
8.  To Erase all Preset cruise points click on “clean.”
9.  To start the PTZ cruise, Open the shortcut menu and select 

“start cruise”. To stop the PTZ cruise, Open the shortcut menu 

and select “stop cruise”.

Selecting this shortcut opens the PTZ menu. PTZ stands for Pan, Tilt, Zoom cameras (Not included).  This menu option 

only controls compatible PTZ cameras that are properly setup in the device management section of the menu.