SVAT Electronics CV301-8CH Manuel D’Utilisation

CV301-8CH

now you can see

•  Selecting this shortcut prompts the DVR to begin recording (if it is not already recording). This will override 

any schedule that is set

•  Selecting this shortcut prompts the DVR to stop the manual recording

• 

Selecting this option prompts the PTZ cruise to start (if you have set up the PTZ cruise). Selecting it again 

will stop the PTZ cruise 

• 

Selecting this option prompts the cameras to begin sequencing through each camera and then to quad 

screen. This function will only work if at least one camera is connected to the device. See Auto Seq setup on 

Pg. 18 for more information 

To start auto sequence: 
1.  Right click the mouse and select “Start Auto Seq”, the cameras will then start sequencing through. 
2.  To stop auto sequence, double click the screen and you will return to the quad view screen.  

PIP stands for picture in picture. This mode allows you to view camera one in full screen and up to two camera 

channels (of your choice) as smaller screens in either corner of the screen.  You must have at least two cameras 

connected to your DVR for PIP mode to function properly.  

To turn on PIP mode: 
1.  Right click the mouse and scroll to “PIP mode”, once highlighted, two 

options will appear, 1x1 and 1x2. 

2.  1x1 allows you to view camera one in full screen and another camera in 

the lower left corner of the screen. 1x2 allows you to view camera one in 

full screen and two other cameras in the bottom left and right corners of 

the screen. 

3.  For both options, clicking on the small camera screen will change the 

camera that you are viewing. 

4.  To exit PIP mode, right click the mouse.