Emerson CF830GES00 Manuel D’Utilisation
3
This Manual Is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan
One stepladder
One wire stripper
One Phillips head screwdriver
One wire stripper
One Phillips head screwdriver
MATERIALS
Wiring outlet box and box connectors must be of type
required by the local code. The minimum wire would
be a 3-conductor (2-wire with ground) of the wire
size, to right:
required by the local code. The minimum wire would
be a 3-conductor (2-wire with ground) of the wire
size, to right:
Installed Wire Length
Wire Size A.W.G.
Up to 50 ft.
14
50-100 ft.
12
If you feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
experience, have your fan installed by a licensed
electrician.
WARNING
!
Unpacking Instructions
For your convenience, check-off boxes are provided next to each step. As each step is completed, place
a check mark in the box. This will insure that all steps have been completed and will be helpful in finding
your place should you be interrupted.
a check mark in the box. This will insure that all steps have been completed and will be helpful in finding
your place should you be interrupted.
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
missing. Call Toll-Free:
1-800-654-3545
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
WARNING
!
WARNING
!
1.
Open styrofoam unit containing fan. Remove upper
and center sections of styrofoam unit. Remove parts
and check to see that you have received the following:
and center sections of styrofoam unit. Remove parts
and check to see that you have received the following:
a. One Fan Motor and Housing Assembly
b. One Ceiling Cover
c. Five Fan Blades
d. Five Flange Assemblies
e. Five Flange Medallion Assemblies
f. One Coupling Cover
g. One Hanger Bracket
h. One 10” Downrod/Hanger Ball Assembly
i. One 4.5” Downrod
j. One Decorative Upper Scroll
k. One Decorative Lower Scroll
l. One Switch Housing Adapter
m.One Switch Cup/Finial Nut Assembly
n. One Fan/Light Dual Slide Wall Control
b. One Ceiling Cover
c. Five Fan Blades
d. Five Flange Assemblies
e. Five Flange Medallion Assemblies
f. One Coupling Cover
g. One Hanger Bracket
h. One 10” Downrod/Hanger Ball Assembly
i. One 4.5” Downrod
j. One Decorative Upper Scroll
k. One Decorative Lower Scroll
l. One Switch Housing Adapter
m.One Switch Cup/Finial Nut Assembly
n. One Fan/Light Dual Slide Wall Control
(transmitter)
o. Four 40 Watt Candelabra Base Bulbs
p. One loose parts bag containing:
p. One loose parts bag containing:
1.
One clevis pin
2.
One hairpin clip
3.
Five 12 Ga wire nut connectors
4.
Two #8-32 x 1-14” threaded studs
5.
Two #8-32 knurled knobs
Tools Needed for Assembly
6. Two #8 external tooth lockwashers
7. Eleven 1/4-20 x 12mm oval head CR
7. Eleven 1/4-20 x 12mm oval head CR
screws
8. Twenty-one #10-32 x 22mm oval head CR
screws
9. Five #8-32 x 10mm pan head CR screws
10. One 2mm hex wrench
11. One balancing kit
11. One balancing kit
NOTE: Place the parts from the loose parts bags
in small containers to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
in small containers to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
U.L. Model No.: CF830
A
K
J
N
G
H
I
P
M
D
B
C
E
F
L
4
3
2
1
O