PGS TC36 AR Manuel D’Utilisation

18      36ARB2 

050505-36

All outer joints of the vent pipe must be sealed with the ap-
proved "High Temp." self-adhesive aluminum tape provided. 
Wrap the tape completely around the joint and press fi rmly 
in place.

After sealing the vent pipe an insulating blanket and cover 
must be installed around the vent pipe, fl ush with the top of 
the unit and secured by fi tting tabs through slots and bending 
over tabs 180° as shown in fi g #24. The parts required are 
included. *NOTE: bending tabs to 90° away from arc bend