Dimplex SS5800PB Manuel D’Utilisation

9

Should the heater overheat, an 

automatic cut out will turn the 

heater off and it will not come 

back on without being reset.  

It can be reset by switching 

the Main On/Off Switch to Off 

and waiting 5 minutes before 

switching the unit back on.

 CAUTION:  If you need to 

continuously reset the heater, 

unplug the unit and call Dimplex 

North America Limited at 1-888-

346-7539.

 (Figure 2)

the stove is supplied with an 

integrated On/Off remote control, 

that is factory syncronized with 

the stove.
To operate, push the ON button 

to turn stove on, push the OFF 

button to turn the stove off

. The 

amount of heat produced will 

be dependant on positioning of 

manual heat controls.

 NOTE: Ensure that the stove’s 

On/Off switch is set to the 

remote control setting (“ 

II ” 

position). 

on 

Button

Battery 

Cover

 

 

OFF

Button

Battery 

Follow these steps for remote 

control initialization if required:

①

  Set the main power switch to 

OFF.

②

  Set the 3 Position Switch to 

the Remote position (refer to 

Operation Section).

③

  Wait a minimum of five (5) 

seconds and then turn the 

main power ON.

④

 

Within 10 seconds of re-

acquiring power, press the ON 

button located on the remote 

control transmitter.

 NOTE: You will have only 10 

seconds to perform this last