Dimplex DFG3033 Manuel D’Utilisation

12  

www.dimplex.com

independent frequencies to 

prevent interference with other 

units.

Depress tab on the battery 

1. 

cover on the back of the 

remote control and remove 

battery cover (Figure 6).
Install two (2) aaa batteries 

2. 

into the remote control 

(included).
Ensure child lock is in the 

3. 

“unlocked” position (Figure 6).
Replace the battery cover.

4. 

NOTE:  When the “baT” 

  

battery must be recycled 

or disposed of properly. 

Check with your Local

authority or Retailer for recycling 

advice in your area.

Plug cord into 120 volt wall 

1. 

outlet.
Ensure the Main on/off 

2. 

switch located in the switch 

box on the fireplace in the 

upper right hand corner is in 

the 

 

 on position (Figure 

5a).
set the 3 Position Manual 

3. 

Control (Figure 5b) to 

the 

Remote position (left 

position).
Press and hold the 

4. 

Initialization button on the unit 

(Figure 5C).
While holding the Initialization 

5. 

button, press the Flame/

heat on/off   button on the 

remote control.
Release the Initialization 

6. 

button on the unit.
Press the Flame/heat on/off 

7. 

button   to turn the Flame/

heat function on.

 

 

batteries

Child Lock

symbol is present on 

the remote control it is 

recommended to replace the 

batteries promptly, to maintain 

full functionality of the remote/

fireplace.  The remote control 

has a battery backup time of 

only several hours.