Dimplex DFG3033 Manuel D’Utilisation

11

Operation

Electric Fireplace Manual

Control

The manual controls for the

fireplace are located in the upper

right hand corner (Figure 5).

A. Main On/Off Switch

supplies power to the 3 Position

Manual Control switch.

B. 3 Position Manual

Control Switch

Remote (left position): The

unit is operated with the remote

control.
Flame (center position): The

flame effect is turned on.
Flame & Heat (right position):

The flame effect and heater are

turned on simultaneously. When

the manual control is in the

Flame

& Heat position the heater does

not run on the remote operated

thermostat.

!

NOTE: When the manual

Figure 5

a

b

C

control switch is in the

Flame

or

Flame & Heat positions, the

fireplace unit will not operate

with the remote control.

C. Initialization Button

used to synchronize the remote

control with the fireplace.

Resetting the Temperature

Cutoff Switch

should the heater overheat, an

automatic switch will turn the

heater off and it will not come

back on without being reset.

The temperature cutoff switch

can be reset by unplugging the

unit, waiting five (5) minutes and

plugging the unit back in.

CAUTION: If you need

to continuously reset the

heater, unplug the unit and

call Dimplex north america

Limited at 1-888-346-7539

for technical support. Please

have your model and serial

number ready when calling.

Remote Control

The remote control has a range

of approximately 50 feet (15.25

m), it does not have to be pointed

at the fireplace and can pass

through most obstacles (including

walls). It is supplied with 243