Dimplex DFG3033 Manuel D’Utilisation

9

  

Mark the desired location 

3. 

on the floor and store the 

fireplace in a safe, dry and 

dust free location.
use studs to frame an 

4. 

opening of 31 ¾ inches (807 

mm) wide x 22 ¾ inches (578 

mm) high x 9 ½ inches (241 

mm) deep.

Option #1 - The power cord can 

be lead from behind the trim and 

along the wall to an outlet near 

the fireplace. 
Option #2 - a new outlet can be 

installed inside the new frame 

construction.  Plug the unit into 

a 15 amp, 120 volt outlet.  If the 

cord does not reach, you may 

use an extension cord rated for a 

minimum of 1875 Watts.
Option #3 - hardwire

Wire a dedicated, properly 

1. 

fused circuit with 120 volt, 

15 

amp rating.  allow up to eight 

(8) feet (2.4 m) of service 

cable for connecting power 

supply to junction box on 

fireplace when installing after 

finishing wall.

  CAUTION:  use two 

conductor, non-metallic sheath 

cable with ground wire (three 

(3) wires total) for the incoming 

power supply on fireplace inserts.  

use appropriate wire to meet 

local and national electrical codes 

for rated power consumption.

Remove the outer jacket and 

2. 

strip the individual conductor 

from the end.
Loosen the screw securing 

3. 

the junction box cover and 

remove the cover.