Emerson 1F92 Manuel D’Utilisation

the programming examples section
lists these factory settings. If the
times and temperatures are the same
as your schedule, you may simply
run the factory installed program by
pressing PROGRAM

RUN

Compressor Short-Cycle

Compressor Short-Cycle
Protection.

Protection.

Protection.
Your thermostat is designed to
protect your system against
premature compressor failure by
“locking out” the compressor. This
ensures that the compressor will stay
off for approximately five minutes
between cycles. When the thermo-
stat is in compressor lock-out, the
word COOL will flash. During this
period, the compressor will not be
energized.

Programmable Fan Control.

Programmable Fan Control.
This feature allows you to have your
fan operate continuously through
one or more programmed time
periods. This is useful if you want to
have constant air circulation during
a specific time period. If you do not
use this feature, the fan will cycle
normally with the heating and
cooling system.

To program the fan, follow the steps
in the PROGRAMMING section. In
each time period, you can press the
FAN key to select a continuous fan
or a normally cycling fan. The
display will show

PRG F

G F

G FAN ON

AN ON

when continuous fan is selected.
This means at the time you set the
period to start, the fan will come on
and run continuously until the next

program time period.

Example: Your thermostat is
programmed with the original
factory settings for the Monday
MOR period in the heating mode.

Pressing PROGRAM

VIEW

will

display

MOR

MOR, 6AM

6AM

6AM and 70

70.

Pressing the FAN key will toggle
the programmable fan ON and a
second press would turn it back
OFF. When

PRG F

G F

G FAN ON

AN ON

AN ON is in the

upper right of the display, your
thermostat is programmed to adjust
the temperature to 70° at 6AM and
also bring the fan on to run
constantly until the next program
time period.

At the next time period you may
choose to continue the program fan

Features