Danby DPAC7099 Manuel D’Utilisation

8

Important: The exhaust hose must be properly vented 
outdoors during air conditioning mode.

1) Press the 

POWER SWITCH key (Fig. A) to switch the

unit on, and the previous set temperature will be shown in the
temperature display area of the control panel. 

2) Press the MODE key (Fig. B) until the COOL indicator light
illuminates on the control panel (Fig. C). Each depression of
the MODE key will advance to a different mode setting
(Cool

- Dehumidify

- Fan

- Auto

)

3) Press the appropriate increase or decrease buttons (Fig.
D) to select a suitable operating temperature setting.
Temperature settings are adjustable between 16°C (61°F) to
32°C (89°F)

4) Press the FAN key (Fig. E) to select the desired fan speed
setting (High

- Med.

- Low

- Auto ). Your selection will

appear on the control panel (each depression of the fan key
will advance to a different setting as shown in Fig. F). 

• Cooling stops automatically when the set temperature is
achieved. Cooling resumes when the room temperature rises
above the set temperature level. 

1) Drain excess water from the tank by placing a pan under the
drain water outlet (Fig. 4)

2) Remove the drain plug and let the water drain into the pan.

3) When the water stops draining out, replace the drain plug, and
put the tube back in with the clip pointing up. 

4) Remove the pan of water.

5) Operate the unit in Fan mode to dry the interior of the unit.