Regency E33-LP Manuel D’Utilisation

E33 FPI Direct Vent Gas Insert

5)  Re-install the grate (reverse step 3).

6)  Line up the pin holes (located at the bottom 

of log 03-23) to the pins of the rear log sup-
port and position them into place. (refer to 
Diagram 3)

7)  Align the bottom grooves of log 03-21 onto 

the right side of the grate and gently slide 
the log back until it touches the locating tab 
(refer to Diagram 4 & 5).

12) Place log 03-19 over the left center of the 

grate. Ensure the log set looks like Diagram 
12.

11) Place log 03-24 over log 03-23 and log 03-21 

ensuring the pin hole of log 03-24 lines up 
with the right pin of log 03-23 and the right 
pin of log 03-21 (refer to Diagram 11).

10) Place log 03-18 over log 03-23 and log 03-20. 

Ensure the pin hole of log 03-18 lines up with the 
middle pin of log 03-23 and the right pin of log
 03-20 (refer to Diagram 9 & 10).

8)  Align and position the pin hole of log 03-20 

down into the left locating pin of log 03-21. 
Slide into the groove and gently place into 
position until it touches the locating tab. 
(see Diagram 6 & 7)

9) Place log 03-22 over log 03-23 and 

log  03-20. Ensure the pin hole of log 
03-22 lines up with the left pin of log 
03-23  as well as the left pin of log
 03-20 (refer to Diagram 8).