Regency F37-LPG Manuel D’Utilisation

F37 Regency

®

 Rear Flued Room Sealed Freestanding Gas Heater

23

4)  Remove the two outside frame pieces by 

removing two screws per side.  See diagram 
below.

5)  At this point you should disconnect the gas 

at the valve. You can access it through the 
front now that the control panel is off, or you 
can access it through the rear pedestal cover 
plate.

6)  Carefully remove the logs and embers.

7)  Remove burner. See diagram below. 

8)  Remove all 18 screws holding the burner 

tray assembly in place.

9)  Carefully lift the burner tray assembly out. 

Be careful not to tear gaskets when lifting 
out the valve tray; these gaskets seal the 
valve from the exterior of the fi rebox.

10) To replace the burner tray assembly, simply 

reverse these instructions.