Frigidaire DGGF3032KB Manuel Du Propriétaire

Page de 36
31
caution
The door is heavy. For safe, temporary storage, lay the 
door flat with the inside of the door facing down.
Most oven doors contain glass that can break. 
Read the following recommendations:
1.  Do not close the oven door until all the oven racks 
are fully in place.
2.  Do not hit the glass with pots, pans, or any other 
object.
3.  Scratching, hitting, jarring or stressing the glass 
may weaken its structure causing an increased risk 
of breakage at a later time.
REMOVING AND REPLACING THE LIFT-
oFF oven doors
To Remove Oven Door:
1.  Open oven door completely (horizontal with floor - 
See Figure 1).
Door Hinge locations
with oven door fully open
Figure 1
Figure 2
care & cleaning
Figure 3
Figure 4
Around
2.  Pull the door hinge locks on both left and right 
door hinges down from the oven frame completely 
towards the oven door (See Figure 2). A tool such as 
a small flat-blade screwdriver may be required.
3.  Firmly grasp both sides of oven door along the door 
sides (Do not use the oven door handle - See Figure 3).
4.  Close the door to the broil stop position (the oven door 
will stop into this position just before fully closing).
5.  With the oven door in the broil stop position, lift the 
oven door hinge arms over the roller pins located on 
each side of the oven frame (See Figure 4).
To Replace Oven Door:
1.  Firmly grasp both sides of oven door along the door 
sides (Do not use the oven door handle - See Figure 3).
2.  Holding the oven door at the same angle as the 
removal position, seat the hook of the hinge arm over 
the roller pins located on each side of the oven door 
frame (See Figure 4). The hook of the hinge arms 
must be fully seated onto the roller pins.
3.  Fully open the oven door (horizontal with floor - See 
Figure 1).
4.  Push the door hinge locks up towards and into the 
oven frame on both left and right oven door hinges 
(See Figure 2) to the locked position.
5.  Close the oven door.
10°
Oven door
Hinge