Denon S-302 Manuel D’Utilisation

n

A broadband line connection to the Internet is required in order to 
use the S-302’s Internet radio function.

n

This  is  a  device  that  is  connected  to  the  broadband  line  to 
communicate with the Internet.

n

When  using  the  S-302,  we  recommend  you  to  use  a  router 
equipped with the following functions:

• Built-in DHCP (Dynamic Host Configuration Protocol) server
  This function automatically assigns IP addresses on the LAN.
• Built-in 100 BASE-TX switch
  When  connecting  multiple  devices,  we  recommend  a  switching 

hub with a speed of 100 Mbps or greater.

n

The S-302 does not come with an Ethernet cable.
Purchase a cable of the required length.

n

A computer with the following specifications is required to operate 
the music server:

• OS
  Windows® XP Service Pack2, Windows Vista
• Software
  .NET  Framework  1.1,  Windows  Media  Connect  (Windows  XP), 

Windows Media Player Ver.11

• Internet browser
  Microsoft Internet Explorer 5.01 or later
• LAN port
• 300 MB or more free disk space
b

 Free space is required to save music files. The following sizes are 
approximate.

128kbps

Approx. 1 MB

Approx. 60 MB

192kbps

Approx. 1.5 MB

Approx. 90 MB

256kbps

Approx. 2 MB

Approx. 120 MB

392kbps

Approx. 3 MB

Approx. 180 MB

1400kbps

Approx. 10 MB

Approx. 600 MB

(1MB = 10

6 

bytes)

A contract with an ISP is required to connect to the Internet.
No  additional  contract  is  needed  if  you  already  have  a  broadband 
connection to the Internet.

• Depending  on  the  server,  video  files  may  be  displayed,  but  they 

cannot be played on the S-302.

• For  connections  to  the  Internet,  contact  an  ISP  (Internet  Service 

Provider) or a computer shop.

• The types of routers that can be used depend on the ISP. Contact an 

ISP (Internet Service Provider) or a computer shop for details.

n

• If you have an ISP contract for a line on which network settings are 

made manually, make the settings at “Network Setup” (vpage 
20, 21).

• When using a broadband router (DHCP function), the S-302 makes 

the  network  settings  automatically,  so  there  is  no  need  to  make 
them yourself.

• If connecting the S-302 to a network with no DHCP function, make 

the settings at “Network Setup” (vpage 20, 21).

• The  S-302  is  not  compatible  with  PPPoE.  A  PPPoE-compatible 

router is required if you have a contract for a line of the type with 
which the PPPoE is set.

• Depending on the ISP with which you have your contract, it may 

be  necessary  to  make  proxy  server  settings  to  use  the  Internet 
radio function. If you made proxy server settings on the computer 
to connect to the Internet, make the same proxy server settings on 
the S-302.

• The  S-302  uses  the  DHCP  and  Auto  IP  functions  to  make  the 

network settings automatically.

 (vpage 24)

n

  No Ethernet cable is included with the S-302. Procure a cable with 

the necessary length.

Be sure to use a shielded type cable for USB/Ethernet connections.
Depending  on  the  connected  computer/router,  there  may  be  much 
noise generated from the cable.

To WAN side

Internet radio

Router

Computer

To LAN port
To LAN port

To WAN side

Internet radio

Modem

Computer

LAN port/

Ethernet port

Wireless LAN rod 
antenna (Supplied)

Turn right

Modem

Router with access point

1.S-302E3_1st.indd   19

2007/07/31   17:44:40