Kärcher A 2701 Manuel D’Utilisation
11
English
Preparing the vacuum cleaner
for use
for use
!
Undo both fasteners and take the motor
housing off the dirt container.
housing off the dirt container.
!
Take the wheels and swivel castors out of the
dirt container and press them into the
designated sockets. The wheels “click” into
position.
dirt container and press them into the
designated sockets. The wheels “click” into
position.
!
Attach the accessories bracket.
For dry vacuuming:
!
Insert the paper filter bag.
Note: Coarse, dry dirt can also be vacuumed up
without the paper filter bag.
without the paper filter bag.
!
Place the motor housing on the dirt container
and close both fasteners.
and close both fasteners.
Connect accessories.
!
Insert the suction hose into the connection on
the unit. The suction hose “clicks” into position.
the unit. The suction hose “clicks” into position.
!
Connect the two suction tubes to each other
and then to the suction hose.
and then to the suction hose.
!
Connect the floor nozzle to the suction tube.
Note: For normal use the crevice tool is connected
directly to the curved handle. However, the crevice
tool can also be fitted directly to the suction tubes.
directly to the curved handle. However, the crevice
tool can also be fitted directly to the suction tubes.
Operating the vacuum cleaner
Starting work
!
Check that the paper filter bag and the dirt
container are not yet full.
container are not yet full.
!
Insert the mains plug into a socket.
!
Switch the unit on when you want to start work.
!
The floor tool can be adjusted with your foot for
vacuuming hard floors or carpets.
vacuuming hard floors or carpets.