Kärcher A 2701 Manuel D’Utilisation
13
English
Checking/replacing the flat pleated
filter
filter
(Order no. 6.414-498)
Regularly check the flat pleated filter for damage.
If the flat pleated filter is damaged, replace it
immediately, otherwise the motor may be damaged.
If the flat pleated filter is damaged, replace it
immediately, otherwise the motor may be damaged.
!
Switch the unit off and open the cover on the
filter compartment.
filter compartment.
!
Remove the flat pleated filter and replace with
a new one. Close the cover.
a new one. Close the cover.
Checking and cleaning the
accessories
accessories
!
Check the nozzle, suction hose and suction
tube for blockages. They can be cleaned by
rinsing with water. Leave them to dry before
using.
tube for blockages. They can be cleaned by
rinsing with water. Leave them to dry before
using.
Storing the vacuum cleaner
!
Switch the machine off.
!
Pull out the mains cable.
Note: Pull out the mains cable by the plug. Never tug
the cable.
the cable.
If you have been working in wet-vacuuming
mode:
mode:
!
Empty the dirt container, rinse the inside
if required and leave to dry.
if required and leave to dry.
If you have vacuumed up viscous liquids:
!
Rinse the accessory.
!
Place the suction tubes and accessories in the
accessory bracket.
accessory bracket.
Technical Specifications
Mains connection
220–240 V
(AUS)
240 V
1~50,60 Hz
Fuse protection (surge-proof)
10 A
Power (suction motor)
P
max
1200 Watt
P
nom
1000 Watt
Air flow rate
68 l/s
Vacuum
200 mbar
Capacity
18 l
Max. water capacity
12 l
Length
390 mm
Width
290 mm
Height
490 mm
Weight without accessories
6 kg
Nominal width, accessory
Ø 35 mm
Sound level
72 dB(A)
Class of protection
II
Cable length
5 m
2.
2.
1.
1.