Emerson Series 3000 MVD Manuel D’Utilisation

109

4. If desired, you can mark the transfer variable with asterisks that will appear on the transfer 

(OIML) ticket and in the transfer log, and optionally, the process monitor. To do this, refer to 
Figure 12-1 and:

a.

Select the transfer variable and set 

 to 

. Data for this process 

variable will be marked with asterisks on the transfer (OIML) ticket and in the transfer log, 
and optionally on the process monitor (see Step 5).

b.

For all other process variables, set 

 to 

.

Note: See Section 19.5.5 for a discussion of the transfer log.

5. If desired, you can specify that all process variables configured as approved in Step 4 will be 

marked with asterisks on the process monitor (if the process variables are configured for 
display; see Section 12.3). To do this, refer to Figure 14-2 and set 

 as 

desired:

•

: Data for all process variables configured as approved in Step 4a will be 

marked with asterisks on the process monitor (if the process variables are configured for 
display; see Section 12.3).

•

: No data will be marked with asterisks on the process monitor.

6. Determine how you will end the transaction, and perform required configuration. Typically, 

printing a transfer (OIML) ticket or batch (OIML) ticket ends the transaction. However, if 
printing is not available, you can end a custody transfer (OIML) transaction by using the 
transfer reset function, and you can end a custody transfer (OIML/batch) transaction by 
resetting the batch.

•

If you will print transfer (OIML) or batch (OIML) tickets:

a.

Referring to Figure 13-2, set 

 to 

.

b.

Select 

 and configure printer communications (see Section 13.3.2).

c.

Configure ticket format and ticket printing as described in Section 15.6.

•

If you will use the transfer reset function via the 

 button, refer to Figure 13-1 and 

set 

 to any value other than 

. The 

 button will now be available 

from the Transfer Totalizer screen on the View menu.

•

If you will use the transfer reset function via discrete input 1 or discrete input 2:

a.

Referring to Figure 13-1, set 

 to any value other than 

.

b.

Select 

.

c.

Select 

, then specify the discrete input to be used to complete 

the transfer.

d. Select 

 and specify the data to be added to the transfer log when 

the specified discrete input is activated. 

Note: These menu options are similar to the Transfer Print Screen and Transfer Screens To Print 
menu options described in Section 15.6.2, except that if the discrete input is configured here, no 
attempt will be made to print a ticket when the discrete input is activated, and the other menu allows 
you to print a ticket containing only inventory data. The discrete input and transfer screens specified 
here are reflected in the corresponding menu options, and vice versa.