Emerson Model 1700 Manuel D’Utilisation

If the fault timeout period expires while the alarm is still active, the fault actions are
performed. If the alarm condition clears before the fault timeout expires, no fault actions
are performed.

ProLink II allows you to set Fault Timeout in two locations. However, there is only one parameter, and
the same setting is applied to all outputs.

5.5.2

Configure Status Alarm Severity

Display (standard)

Chinese-language
display

ProLink II

ProLink

 > Configuration > Alarm > Severity

ProLink III

Device Tools

 > Configuration > Alert Severity

Field Communicator Configure > Alert Setup > Alert Severity > Set Alert Severity

Use Status Alarm Severity to control the fault actions that the transmitter performs when it
detects an alarm condition.

Restrictions
•

For some alarms, Status Alarm Severity is not configurable.

•

For some alarms, Status Alarm Severity can be set only to two of the three options.

Micro Motion recommends using the default settings for Status Alarm Severity unless you have a
specific requirement to change them.

1.

Select a status alarm.

2.

For the selected status alarm, set Status Alarm Severity as desired.

Configure device options and preferences

72