Emerson 5081-P-FF/FI Manuel D’Utilisation

Wire sensor per Figure 1. Refer to the sensor instruction
manual for more details.

If your sensor has an integral preamplifier or you are using
a remote preamplifier, you will need to change the pream-
plifier location in the program menu. Please see Figure 14.
Select “trAnS” for integral preamplifier or “SnSr” for J-box
or sensor preamplifier.

Wire sensor as shown in Figure 5. Refer to the sensor
instruction manual for more details.

Sensors with integral preamplifiers can be wired to the ana-
lyzer through a remote junction box (PN 23550-00). Wire
the extension cable and sensor cable point-to-point. Refer
to the sensor instruction manual for more details.

For general purpose areas, wire power as shown in
Figure 1. For hazardous areas, please see hazardous
area installation drawings.

(9 - 32 VDC)

NOTE: REF wire covered with

sleeving. To prevent 
depletion of KCL if 
other wires touched, 
remove sleeving 
before wiring to TB-7.