Emerson 308014EN Manuel D’Utilisation
10-45
Rosemount Tank Radar REX
Chapter 10 Mechanical Installation
Installation Manual
308014EN, Edition 4
May 2013
May 2013
9
Remove the yellow protection
cap but do not remove the rub-
ber cone. Fit the Transmitter
Head and the Housing onto the
flange. Carefully check that the
Guide Pins enter their respec-
tive holes. Tighten using four
M10 screws and washers.
cap but do not remove the rub-
ber cone. Fit the Transmitter
Head and the Housing onto the
flange. Carefully check that the
Guide Pins enter their respec-
tive holes. Tighten using four
M10 screws and washers.
10 Tighten the Weather Protection
Hood with the screw at the top
of the transmitter head.
of the transmitter head.
3960_Housing_Mount.eps
4 M10 screws
and washers
Guide pins
Flange
Do not remove this cone!
Protection cap
Screw
Weather
Protection Hood
R
TG3900_W
eaProtMount.eps