Pfaff 350P Manuel D’Utilisation

7

Layer the project fabric with the material 
that will be felted together to create the 
embellishment. Make sure that the smaller 
piece to be felted is on the correct side of  
the project (right or wrong side). 

The embellishing fabric can be put on either 
the right or the wrong side of  the project. 
Experiment fi rst on scraps to see which look 
you like best for your project.

Place the layers to be felted together under 
the clear fabric cover with needle guard. 
Adjust the height if  you need to at this time 
so the project can move freely under the 
clear fabric cover with needle guard 
(see page 3). 

Move the fabric in any direction so the 
needles can mesh the layers together. 

When you have fi nished embellishing the 
needle stop position will automatically be up 
and out of  the project. Because the needles 
always stop in the highest up position, your 
projects are very easy to place into the felting 
area and very easy to remove. You will never 
break needles placing or removing your 
project.