Pfaff 350P Manuel D’Utilisation

9

Use #S1037 needles for the needle felting 
machine. Do not use any other type of  
needles.

 When you change needle(s), unplug the 

power cord from the wall outlet. 

1.  Turn the handwheel until the needle bar 

is at the highest position. 

2.  Remove the presser height adjusting 

screw and carefully remove the clear 
fabric cover with needle guard, from the 
machine. 

3.  Loosen the front needle clamp holder 

fi xing screw by turning the 1.5mm Allen 
wrench counter-clockwise. 

4.  Hold the needle clamp, lower it slowly 

and remove it from the needle bar. 

5.  To remove the individual outer needles, 

loosen the needle fi xing screw on the 
needle clamp by turning the 1.5mm Allen 
wrench counter-clockwise and remove 
the needle(s). Insert the new needle(s) 
until the top of  the needle touches the 
top of  the needle hole. Tighten the 
needle fi xing screw with 1.5mm hexagon 
wrench by turning the Allen wrench 
clockwise.