JVC KD-DV7402 Manuel D’Utilisation

ENGLISH

54

•  Network-Tracking Reception requires two types of 

RDS signals—PI (Programme Identification) and AF 
(Alternative Frequency) to work correctly. Without 
receiving these data correctly, Network-Tracking 
Reception will not operate correctly.

•  If a Traffic Announcement is received by TA Standby 

Reception, the volume level automatically changes to 
the preset level (TA Vol) if the current level is lower 
than the preset level.

•  When Alternative Frequency Reception is activated 

(with AF selected), Network-Tracking Reception is 
also activated automatically. On the other hand, 
Network-Tracking Reception cannot be deactivated 
without deactivating Alternative Frequency 
Reception. (See pages 15 and 36.)

•  TA Standby Reception and PTY Standby Reception 

will be temporarily canceled while listening to an AM 
station.

•  If you want to know more about RDS, visit 

<http://www.rds.org.uk>.

•  In this manual, words “track” and “file” are 

interchangeably used.

•  This unit can only play back audio CD (CD-DA) files if 

different type of files are recorded in the same disc.

•  When a disc is inserted upside down, “Please Eject” 

appears on the display. Press OPEN, then 

0

 to eject 

the disc.

•  If the ejected disc is not removed within 15 seconds, 

the disc is automatically inserted again into the 
loading slot to protect it from dust. Playback starts 
automatically.

•  By pressing SOURCE on the unit, you can also turn on 

the power. If the source is ready, playback also starts.

•  If you turn off the power while listening to a track, 

playback will start from where it had been stopped 
previously next time you turn on the power.

•  If you change the source while listening to a disc, 

playback stops.

  Next time you select “DISC” as the playback source, 

playback will start from where it had been stopped 
previously.

•  After ejecting a disc or removing a USB device, 

“No Disc” or “No USB” appears and you cannot 
operate some of the buttons. Insert another disc, 
reattach a USB device, or press SOURCE to select 
another playback source.

•  During SSM search...
  – All previously stored stations are erased and the 

stations are stored anew.

  – Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency).

  – When SSM is over, the station stored in No. 1 will 

be automatically tuned in.

•  When storing a station manually, the previously 

preset station is erased when a new station is stored 
in the same preset number.

EN52-59_KD-DV7402_001A_f.indd   54

EN52-59_KD-DV7402_001A_f.indd   54

2/20/08   12:14:18 PM

2/20/08   12:14:18 PM