3M AP-DWS1000 LF Manuel D’Utilisation
4
Introduction:
This manual explains installation and operation of the Aqua-Pure
®
AP-DWS1000 & AP-
DWS1000 LF Drinking Water Filtration Systems. Please read each section of this manual
carefully.
carefully.
The Aqua-Pure AP-DWS1000 & AP-DWS1000 LF Drinking Water Filtration Systems are
designed to connect permanently to a home plumbing system. To ensure that the installa-
tion conforms to your state and local plumbing codes, it is recommended that the installation
be performed by a qualified installation specialist for drinking water filtration systems or a
licensed plumber.
designed to connect permanently to a home plumbing system. To ensure that the installa-
tion conforms to your state and local plumbing codes, it is recommended that the installation
be performed by a qualified installation specialist for drinking water filtration systems or a
licensed plumber.
Specifications:
Inlet/Outlet Size: 1/4” Tube with Quick Connect Fittings
Flow Rate: 0.6 gpm (2.3 lpm)
Temperature Range: 40-100°F (4.4-37.8°C)
Pressure Range: 25-125 psi (172-862 kPa)
Capacity: 625 gallons (2,366 liters)
Weight: 7 lbs. (3.2 kg)
Dimensions: 15-3/4” H x 10-7/8” W x 3-1/4” D (40 cm x 28 cm x 8 cm)
Flow Rate: 0.6 gpm (2.3 lpm)
Temperature Range: 40-100°F (4.4-37.8°C)
Pressure Range: 25-125 psi (172-862 kPa)
Capacity: 625 gallons (2,366 liters)
Weight: 7 lbs. (3.2 kg)
Dimensions: 15-3/4” H x 10-7/8” W x 3-1/4” D (40 cm x 28 cm x 8 cm)
Parts Included: Model AP-DWS1000 Drinking Water System
• Drinking Water System Bracket Assembly (includes heads, connections & shut-off meter)
• Filter Cartridge #1 (AP-DW80)
• Filter Cartridge #2 (AP-DW90)
• Saddle Valve Assembly
• Faucet Assembly (with blue tubing)
• Tubing (yellow)
• Mounting Hardware
• Installation, Operation & Maintenance Manual
Model AP-DWS1000 LF (Less Faucet) does not include tubing to connect filter system
to a drinking water faucet. The filter system’s outlet connection will accept 1/4” plastic
or copper tubing.
• Filter Cartridge #1 (AP-DW80)
• Filter Cartridge #2 (AP-DW90)
• Saddle Valve Assembly
• Faucet Assembly (with blue tubing)
• Tubing (yellow)
• Mounting Hardware
• Installation, Operation & Maintenance Manual
Model AP-DWS1000 LF (Less Faucet) does not include tubing to connect filter system
to a drinking water faucet. The filter system’s outlet connection will accept 1/4” plastic
or copper tubing.
Tools Required (not included):
• Drill (cordless recommended)
• Phillips Head Screwdriver
• Adjustable Wrench
• Razor Knife or Tube Cutter
• #8 Gauge Fastening Screws (appropriate for mounting surface)
• Phillips Head Screwdriver
• Adjustable Wrench
• Razor Knife or Tube Cutter
• #8 Gauge Fastening Screws (appropriate for mounting surface)
If a Faucet Hole needs to be Drilled for Faucet:
• Center Punch
• File or Grinding Wheel
• 9/16” Drill Bit (suitable for counter top materials or cast iron/stainless steel)
• File or Grinding Wheel
• 9/16” Drill Bit (suitable for counter top materials or cast iron/stainless steel)
• Failure to follow instructions may void warranty.
IMPORTANT NOTES
• Some state and local plumbing codes may prohibit the use of saddle-type valves and/or drain
connections. See page 3 for list of states.
IMPORTANT NOTES