ONKYO tx-sr444 Manuel D’Utilisation

Advanced Settings (Setup Menu)

HDMI CEC (RIHD)

Off

Setting to "On" enables the input selection link 

and other link functions with HDMI connected 

CEC compliant device.

"On": Use this function

"Off": Do not use this function

When changing this setting, turn off and then on 

again the power of all connected components.

● Depending on the TV set, a link may need to 

be configured on the TV.

● Setting to "On" and closing the on-screen 

menu displays the name of the CEC-

compatible components and "CEC On" on 

the display.

● Power consumption in standby mode may 

increase if "On" is set. (Depending on the TV 

status, the unit will enter the normal standby 

mode.)

● If you operate the MASTER VOLUME control 

on the main unit when this setting is "On" 

and audio is output from the TV speakers, 

audio will be output also from the speakers 

connected to the unit. If you want to output 

from only either of them, change the unit or 

TV settings, or reduce the volume of the unit.

● If abnormal operation occurs when you set 

the setting to "On", set it to "Off".

● When connecting a non-CEC compatible 

component, or when you are not sure 

whether it is compatible, set the setting to 

"Off".

HDMI Standby 

Through

Off

When this is set to anything other than "Off", 

you can play the video and audio of an HDMI 

connected player on the TV even if the unit is in 

standby mode. Only "Auto" and "Auto(Eco)" can 

be selected if "HDMI CEC (RIHD)" is set to "On". 

If you select anything else, set "HDMI CEC 

(RIHD)" to "Off."

● Power consumption in standby mode 

increases if set to anything other than "Off".

"BD/DVD", "CBL/SAT", "GAME 1", "STRM 

BOX": For example, if you select "BD/DVD", you 

can play the equipment connected to the "BD/

DVD" terminal on the TV even if the unit is in 

standby mode. Select this setting if you have 

decided which player to use with this function.

"Last": You can play the video and audio of the 

input selected immediately prior to the unit being 

switched to standby on the TV. When "Last" 

is selected, you can switch the input of the 

unit even in the standby mode with the remote 

controller.

"Auto", "Auto (Eco)": Select one of these 

settings when you have connected equipment 

that conforms to the CEC standard. You can 

play the video and audio of the input selected on 

the TV, irrespective of what input was selected 

immediately prior to the unit being switched to 

standby, using the CEC link function.

● To play players on the TV that do not conform 

to the CEC standard, you will need to turn the 

unit on and switch to the relevant input.

● When using a TV that conforms to the 

CEC standard, you can reduce the power 

consumption in standby mode by selecting 

"Auto (Eco)".