ONKYO TX-NR626 Manuel D’Utilisation

With 

u (Remote Interactive), you can use the 

following special functions:

■

When you start playback on a component connected 
via 

u, while the AV receiver is on standby, the AV 

receiver will automatically turn on and select that 
component as the input source.

■

When playback is started on a component connected 
via 

u, the AV receiver automatically selects that 

component as the input source.

■

You can use the AV receiver’s remote controller to 
control your other 

u-capable Onkyo components, 

pointing the remote controller at the AV receiver’s 
remote control sensor instead of the component. You 
must enter the appropriate remote control code first 
(

• Use only 

u cables for u connections. u cables are 

supplied with Onkyo components.

• Some components have two 

u jacks. You can connect 

either one to the AV receiver. The other jack is for 
connecting additional 

u-capable components.

• Connect only Onkyo components to 

u jacks. Connecting 

other manufacturer’s components may cause a 
malfunction.

• Some components may not support all 

u functions. Refer 

to the manuals supplied with your Onkyo components.

• While Zone 2 is on, the System On/Auto Power On and 

Direct Change 

u functions do not work.

H

u connection (see the illustration).

e.g., cassette tape deck

RI Dock

While the headphones plug is inserted in the 
PHONES jack, 

= indicator lights.

• Always turn down the volume before connecting your 

headphones.

• While the headphones plug is inserted in the PHONES 

jack, the speakers are turned off. (The Zone 2 
speakers are not turned off.)

• When you connect a pair of headphones, the listening 

mode is set to Stereo, unless it’s already set to Stereo, 
Mono, Direct, or Pure Audio (European, Australian 
and Asian models).