ONKYO TX-NR626 Manuel D’Utilisation
Playback
En-46
You can adjust the brightness of the AV receiver’s
display.
display.
When you connect an
u-capable Onkyo
component, you must configure the input display so
that
that
u can work properly.
This setting can be done only from the front panel.
You can temporarily mute the output of the AV
receiver.
receiver.
Setting the Display Brightness
1
Press RECEIVER once followed by DIMMER
repeatedly to switch between: normal, dim, or
dimmer brightness.
repeatedly to switch between: normal, dim, or
dimmer brightness.
Tip
• (North American and Taiwanese models)
Alternatively, you can use DIMMER on the AV
receiver.
receiver.
Changing the Input Display
1
Press TV/CD or GAME.
“TV/CD” or “GAME” appears on the AV receiver’s
display.
“TV/CD” or “GAME” appears on the AV receiver’s
display.
2
Press and hold down the same button (about
3 seconds) to change the input display.
Repeat this step to select the desired input
display.
3 seconds) to change the input display.
Repeat this step to select the desired input
display.
Note
“
• “DOCK” can be selected for the “TV/CD” or “GAME”
input selector, but not at the same time.
• Enter the appropriate remote control code before using
the remote controller for the first time (
TV/CD
→
DOCK
→
→
TAPE
■
TV/CD:
GAME
↔ DOCK
■
GAME:
Muting the AV Receiver
1
Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator
flashes on the AV receiver’s display.
The output is muted and the MUTING indicator
flashes on the AV receiver’s display.
Tip
• To unmute, press MUTING again or adjust the volume.
• Muting is automatically cancelled when the AV
• Muting is automatically cancelled when the AV
receiver is set to standby.