Dynaudio Focus Manuel D’Utilisation

1. Connect a two-pole (+/-) loudspeaker cable to the binding posts, located at rear of the 

cabinet (see Fig. 1). The high quality, gold plated binding posts can accommodate 
different connection systems:
–

 The pins can be put directly into the binding post without 

any tightening necessary.

–

 Un-tighten the binding posts, insert the spade into the opening, and 

secure the spade by tightening the posts.

–

 Un-tighten the binding posts and place the cable into the binding 

posts. Tighten the posts.

• With every connection system, ensure that the contact is tight and has a proper 

contact area.

• Connectors with similar gold plating as the Focus binding posts will typically offer the 

best results and remain corrosion-free. 

• Please ensure that the positive and negative cables do not make contact with each 

other. Tighten the posts, and check the contact after a few days to make sure that it 
hasn’t loosened.