Yamaha DVR-S150 Manuel D’Utilisation

Connecting Speakers

PREP

ARA

TION

When using speakers or cables other than those of the
YAMAHA NX-P150 (consisting of four satellite speakers,
a center speaker and a subwoofer) and its supplied cables,
be careful of the following. When using a commercially
available speaker cable, remove the cable plug from one of
the supplied speaker cables and attach it to the cable you
are using.

When using commercially available speakers

• Use speakers with 6-ohm impedance or more. If a

speaker with less than 6-ohm impedance is used, the
protective circuit may trip or the speaker may
malfunction.

• Use magnetically shielded speakers to prevent

interferences with a TV. If these speakers still interfere
with a TV, move the speakers a little away from the TV.

• We recommend using speakers of the same

manufacturer that have identical sound qualities. If
they are mixed, certain sounds may be heard
unnaturally.

• Use speaker cables that are the same thickness as the

supplied cables.

When using commercially available speaker
cables

• Use speaker cables that are the same thickness as the

supplied cables.

■

To replace speaker cables

Press and hold the release button and
remove the supplied speaker cable from the
cable plug.

Peel away about 10 mm (10/32”) of covering
from the tip of the new cable and twist the
cable core firmly in a clockwise direction.

Be sure to twist the cable core firmly in a clockwise direction.
Twisting loosely may cause a short.

Press and hold the release button, insert the
cable core into the cable plug, then release
the button.

Match the speaker cable polarity (+/–) with the
polarity mark (+/–) of the cable plug.

Using commercially available
speakers or cables

Release button

Note

10 mm (10/32”)

Clockwise

Polarity mark –

Polarity mark +