Yamaha DVR-S150 Manuel D’Utilisation

Page de 99
INSTALLING BATTERIES IN THE REMOTE CONTROL
18
To replace the batteries
If the batteries grow old, the effective operation distance of the 
remote control decreases considerably. If this happens, replace 
the batteries with two new ones as soon as possible.
• Do not use an old battery together with new one.
• Do not use different types of batteries (for example, alkaline 
and manganese) together. Each type of battery has its own 
characteristics even if they are similar in shape.
• If the batteries run out, immediately remove them from the 
remote control to prevent an explosion or acid leak.
• Dispose of the batteries according to the regional regulations.
• If a battery starts leaking, dispose of it immediately. Be careful 
not to let leaking battery acid come into contact with your skin 
or clothing. Before inserting new batteries, wipe the 
compartment clean.
• Replace the batteries within two minutes to preserve the 
memory in the remote control.
1
Press the 
 mark on the battery cover and 
slide off the cover.
2
Insert the two supplied batteries (AA, R06, 
UM-3) into the battery compartment.
Make sure you insert the batteries according to the 
polarity markings (+ and –).
3
Close the battery cover.
Use the remote control within 6 m (20 feet) of the 
CinemaStation and point it toward the remote control 
sensor (page 4).
• Be careful not to spill liquid on the remote control.
• Be careful not to drop the remote control.
• Do not leave the remote control in the following places:
– hot or humid places, such as near a heater or in a bathroom
– extremely cold places
– dusty places
Installing Batteries in the Remote Control
Notes
Press 
%
Using the Remote Control
30˚
30˚
Within 6 m 
(20 feet)
Notes