Sony MX750NI Manuel D’Utilisation

You can use the system as a battery charger for the 
iPod/iPhone when the system is on.
Charging begins when the iPod/iPhone is placed 
on the iPod/iPhone connector. The charge status 
appears on the iPod/iPhone display. For details, 
see the operating manual supplied with your iPod/
iPhone.

Remove the iPod/iPhone from the iPod/iPhone 
Dock on the unit. Turning off the system also stops 
charging the iPod/iPhone.

•

When placing or removing the iPod/iPhone, handle the 
iPod/iPhone at the same angle as that of the iPod/
iPhone connector on the unit; to prevent connector 
damage, do not twist or sway the iPod/iPhone.

•

Do not carry the unit with an iPod/iPhone set on the 
connector. Doing so may cause a malfunction.

•

When placing or removing the iPod/iPhone, brace the 
unit with one hand and take care not to press the 
controls of the iPod/iPhone by mistake.

•

Before disconnecting the iPod/iPhone, pause playback.

•

Hold down ./> to search forward or backward 
while playing a video if m/M does not function.

•

Because the operation of the system and the iPod/
iPhone are different, you may not operate the iPod/
iPhone using buttons on the remote or unit. In this case, 
use control buttons on the iPod/iPhone.

•

When the iPhone is connected to the system and you 
receive a call during playback, playback will pause and 
you can take the incoming call.

•

To change the volume level, press VOLUME +/– on the 
remote. The volume level will not change when 
adjusted on the iPod/iPhone.

•

The iPod/iPhone Dock on the unit is designed for iPod/
iPhone only. You cannot connect any other portable 
audio players.

•

To use an iPod/iPhone, refer to the operating manual 
supplied with your iPod/iPhone.

•

Sony cannot accept responsibility in the event that data 
recorded on the iPod/iPhone is lost or damaged when 
using an iPod/iPhone with this unit.