Sony MX750NI Manuel D’Utilisation

Page de 80
36
GB
*
1
When playing a VBR MP3/WMA file, the system may 
resume playback from a different point.
*
2
You cannot select a memory during playback. Make 
sure to select a memory before starting playback.
Notes
When USB cable connection is necessary, connect the 
USB cable supplied with the USB device to be 
connected. See the operating manual supplied with the 
USB device to be connected for details on the operation 
method.
It may take about 10 seconds before “Reading” appears 
depending on the type of USB device connected.
Do not connect the system and the USB device through 
a USB hub.
When the USB device is connected, the system reads all 
the files on the USB device. If there are many folders or 
files on the USB device, it may take a long time to 
finish reading the USB device.
With some connected USB devices, after an operation 
is performed, there may be a delay before it is 
performed by this system.
Compatibility with all encoding/writing software 
cannot be guaranteed. If audio files on the USB device 
were originally encoded with incompatible software, 
those files may produce noise or interrupted audio, or 
may not play at all.
This system cannot play audio files on the USB device 
in the following cases:
when the number of audio files in a folder exceeds 
999.
when the total number of audio files on a USB 
device exceeds 999.
when the number of folders on a USB device 
exceeds 999 (including the “ROOT” folder and 
empty folders).
These numbers may vary depending on the file and 
folder structure.
Do not save other types of files or unnecessary folders 
on a USB device that has audio files.
The system can play back to a depth of 8 folders only.
This system does not necessarily support all the 
functions provided in a connected USB device.
Resume play is canceled when you turn off the system.
Folders that have no audio files are skipped.
The audio formats that you can listen to with this 
system are as follows:
MP3: file extension “.mp3”
WMA: file extension “.wma”
AAC: file extension “.m4a”
Note that even when the file name has the correct file 
extension, if the actual file differs, the system may 
produce noise or may malfunction.
To use the system as a battery 
charger
You can use the system as a battery charger for 
USB devices that have a rechargeable function 
when the system is on. The charging begins when 
the USB device is connected to the 
 (USB) port. 
The charge status appears in the USB device 
display. For details, see the operating manual 
supplied with your USB device.
Remove the USB 
device
Hold down x (stop) on the 
unit until “No Device” 
appears, then disconnect the 
USB device.
To
Do the following: