ONKYO HT-RC260 Manuel D’Utilisation
49
En
If you’ve connected your Zone 2 speakers to the AV
receiver, as explained in “Connecting Your Zone 2 Speak-
ers Directly to the AV receiver” (
receiver, as explained in “Connecting Your Zone 2 Speak-
ers Directly to the AV receiver” (
“Front High/Front Wide/Zone2” setting to “Zone2”.
Menu
Speaker Setup
Note
• When “Zone2” is selected and Zone 2 turned on, the Zone 2
speakers connected to the FRONT HIGH OR FRONT WIDE
OR ZONE 2 SPEAKERS terminals output sound, but the sur-
round back, front high or front wide speakers connected to the
SURR BACK OR FRONT HIGH OR FRONT WIDE
SPEAKERS terminals do not. When “Zone2” is selected and
Zone 2 turned off, the surround back, front high or front wide
speakers output sound as normal.
OR ZONE 2 SPEAKERS terminals output sound, but the sur-
round back, front high or front wide speakers connected to the
SURR BACK OR FRONT HIGH OR FRONT WIDE
SPEAKERS terminals do not. When “Zone2” is selected and
Zone 2 turned off, the surround back, front high or front wide
speakers output sound as normal.
• When the “Front High/Front Wide/Zone2” setting is set to
“Zone2” and the input selector of Zone 2 is selected, power con-
sumption on standby mode slightly increases.
sumption on standby mode slightly increases.
• Powered Zone 2 cannot be used if “Speakers Type” is set to
“Bi-Amp” (
35).
This section explains how to turn Zone 2 on and off, how
to select an input source for Zone 2, and how to adjust the
volume for Zone 2.
to select an input source for Zone 2, and how to adjust the
volume for Zone 2.
Controlling Zone 2 from the AV receiver
Note
• While Powered Zone 2 is being used, listening modes that
require surround back speakers or front high speakers or front
wide speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES,
Dolby Pro Logic IIz height, and Audyssey DSX™ are unavail-
able.
wide speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES,
Dolby Pro Logic IIz height, and Audyssey DSX™ are unavail-
able.
• When the “Front High/Front Wide/Zone2” setting is set to
“Zone2” and the input selector of Zone 2 is selected, power con-
sumption on standby mode slightly increases.
sumption on standby mode slightly increases.
Setting the Powered Zone 2
1
In the “Speaker Setup” menu, select “Speaker
Settings”, and then press
Settings”, and then press
ENTER.
2
Use
q/w to select “Front High/Front Wide/Zone2”
and
e/r to select “Zone2”.
`
Zone2:
Zone 2 speakers can be used (Powered Zone 2
enabled).
enabled).
Using Zone 2
1
To turn on Zone 2 and select an input source, press
ZONE 2 followed by an input selector button
within 8 seconds.
ZONE 2 followed by an input selector button
within 8 seconds.
Zone 2 turns on, the ZONE 2 indicator lights.
To select AM or FM, press the TUNER input selec-
tor button repeatedly.
tor button repeatedly.
To select the same source as that of the main room,
press ZONE 2 repeatedly until “Z2 Selector:
Source” appears on the display.
press ZONE 2 repeatedly until “Z2 Selector:
Source” appears on the display.
Note
• You cannot select different AM or FM radio stations for
your main room and Zone 2. The same FM/AM radio sta-
tion will be heard in each room.
tion will be heard in each room.
2
To turn off Zone 2, press
OFF.
OFF
ZONE 2
– /+
ZONE 2 indicator
Input selector buttons