Pelco TI2550 Manuel D’Utilisation

C1309M-A  (9/08)

7

Before configuring the camera settings or installing the unit, you must remove the camera assembly from the enclosure to set up the basic wiring 
configurations (refer to Bench Setup on page 9).

The camera can either be configured on a bench using a PC in a lab environment, or using a laptop in the field. The setup instructions vary slightly 
depending upon the type of configuration you choose.

Figure 1. Exploded View of TI2500 Series Thermal Imager

•

During setup, keep the lens cover on the camera to avoid scratching the lens.

•

Do not expose the camera to direct sun for extended periods without the sun shield installed.

ì

Back Plate

î

Enclosure and Sun Shield

ï

Camera Assembly

ñ

Ground Stud

ó

Cable Gland

r

“T” Handle

s

Video Cable

t

Shielded Power Cable and Shielded Serial Cable