Pelco TI2550 Manuel D’Utilisation

8

C1309M-A  (9/08)

•

PC (Pentium

®

 Pro processor, 166 MHz) with Windows

®

 NT 4 (or later, not including Windows Vista

®

)

•

RAM: 128 Mbyte

•

Hard drive: 10 GB

•

Screen resolution: 800 x 600 pixels or higher

•

Serial communication port

To install the TI25 GUI configuration software:

1. Insert the Pelco TI2535 and TI2550 Series resource disc (supplied) into the CD drive of the PC you will be using to configure the camera. The 

disc will automatically open the TI2535 and TI2550 Series disc interface.

2. Click the Software button (refer to Figure 2).

Figure 2. TI2535 and TI2550 Series Resource Disc GUI

3. Your PC will automatically run the installation software. Follow the instructions that appear on the screen.