3com DSA-3CV1001-02 Manuel D’Utilisation
2
S
AFETY
I
NFORMATION
This chapter provides safety information in English, French and German.
The topics covered in this chapter are:
■
■
■
Safety Precautions
The following safety precautions should be taken before installing the
VCN Access Point:
VCN Access Point:
To reduce the risk of electrocution and fire:
■
All servicing should be undertaken only by qualified service personnel.
There are no user serviceable parts in the unit.
There are no user serviceable parts in the unit.
■
Do not plug in, turn on or attempt to operate an obviously damaged
unit.
unit.
■
DO not operate the unit in a location where the maximum ambient
temperature exceeds 40 degrees C.
temperature exceeds 40 degrees C.
■
Be sure to unplug the power supply cord from the wall socket before
attempting to remove and/or replace the unit.
attempting to remove and/or replace the unit.
■
The power supply provides for automatic selection of either 100-120
Vac or 200-240 Vac, 60/50 Hz, as indicated on the safety label
adjacent to the power inlet. Ensure that the available voltage supply at
the mains is within one of these two ranges.
Vac or 200-240 Vac, 60/50 Hz, as indicated on the safety label
adjacent to the power inlet. Ensure that the available voltage supply at
the mains is within one of these two ranges.
■
Use only the special power adapter supplied with the unit.