Eclipse - Fujitsu Ten AVN4430 Manuel D’Utilisation
89
89
ATTENTION
● The image range displayed on the screen
may vary depending on vehicle or road
surface conditions.
surface conditions.
● The image range displayed on the screen is
limited; therefore, you cannot display
something that is located near both ends of
the bumper or under the bumper.
something that is located near both ends of
the bumper or under the bumper.
● Colors shown in the rearward image may be
different from the actual colors of the images
shown.
shown.
● In the following cases, it may be difficult to
watch the screen, but it is not an error.
• In dark places ( at night, etc.)
• The temperature near the lens is high or
• The temperature near the lens is high or
low.
• When there are water drops on the
camera, or when humidity is high (during
rain showers, etc.)
rain showers, etc.)
• Foreign substances (mud, etc.) have
become attached to locations near the
camera.
camera.
• The camera lens has been exposed
directly to sunlight or the rays of
headlights.
headlights.
• If a high-intensity point (sunlight reflected
on the vehicle body, etc.) is reflected on
the camera, it may result in a smearing
phenomenon
the camera, it may result in a smearing
phenomenon
*
particular to the CCD
camera.
* Smearing phenomenon: Refers to an
image lag that is caused in the vertical
direction of a high-intensity point (sunlight
reflected on the vehicle body, etc.)
reflected on the camera.
direction of a high-intensity point (sunlight
reflected on the vehicle body, etc.)
reflected on the camera.
<Screen Appearance>
Point of high-
intensity brightness
intensity brightness