Eclipse - Fujitsu Ten AVN4430 Manuel D’Utilisation

Page de 99
90
90
Reference
Necessary Information
If the following messages appear, check the status again, referring to the cause and action.
(PND) : Displayed on the PND screen.
(LCD) : Displayed on the Sub-display.
If the Following Messages Appear
Message
Cause
Action
In CD/MP3 WMA/DVD mode
DISC CHECK (PND)
INF3 (LCD)
DISCS ARE DIRTY OR 
DAMAGED
The loaded disc is dirty or upside 
down. Check it for proper 
orientation and verify it is clean.
DISC CHECK (PND)
INF5 (LCD)
CD PLAYER FAILS 
MECHANICALLY
The CD player is inoperative for 
some reason.
DISC ERROR (PND)
INF6 (LCD)
WHEN THE CD PLAYER 
INTERNAL TEMPERATURE IS 
HIGH (TO PROTECT PICKUP 
UNIT)
● The temperature in the CD 
player is too high for operation 
to continue. Wait till it cools 
down.
● Resume playing after the 
“High temperature sensed and 
CD stopped” message 
disappears. If the CD still 
cannot play, have your dealer 
repair it.
DISC ERROR (PND)
INF7 (LCD)
AN INTERNAL POWER SUPPLY 
FAILURE IS OCCURRING
● Turn the ACC off once before 
turning it on once again to 
resume operation.
● If this condition persists, 
please contact your dealer.
NO SUPPORT (PND)
ERR (LCD)
NO CORRECT FILE IN CD
Confirm the file.
DISC CHECK (PND)
INF3 (LCD)
The CD/MP3 WMA/DVD is dirty, 
scratched, warped or upside 
down.
Clean the disc if it is dirty. Insert 
the disc correctly if it is 
upsidedown. Do not use the 
scratched or warped disc.
DISC ERROR (PND)
The CD/MP3·WMA or DVD player 
is not operating for some reason.
Eject the disc.
DISC ERROR (PND)
INF6 (LCD)
The temperature of the CD/
MP3·WMA or DVD player has 
become unusually high.
Without performing any other 
operations, wait until the 
temperature comes down 
*
.
Pass code incorrect (PND)
- - - - (LCD)
This message is displayed when 
the pass code that has been 
entered is not correct.
Enter the correct pass code.
Parental lock enabled (PND)
ERR (LCD)
Viewing restrictions are enabled.
Change the setting for viewing 
restrictions and start again.(See 
page 73)
Currently this function is disabled. 
(PND)
- - - - (LCD)
A function that has been disabled 
was selected with the menu.
Follow the directions on the 
screen and start again.