Audiovox 1181293 Manuel D’Utilisation

 

3

 

 
 
 
 
 
 

1.

  

Remove the O.E.M. compartment console 

currently mounted to inner roof of  vehicle. 
Remove (1) one # 8 X 1 3/4" screw from recess 
in front of console near rear view mirror. Pull 
front of  O.E.M. console down to access wiring. 
Disconnect all wiring from console. Pull console 
forward to release rear retainers from inner roof 
recess near center of vehicle. Remove console 
and lay it in a safe place.    See Figure 1.    

 
 
 
 
 
 
 
 

 
 
 
 

2. Turn console over and place on a covered surface. 

Remove plastic molded assembly from cloth covered 
trim ring. Using a 7/64” drill bit, drill through the 
center of the (10) ten plastic pins which secure 
console together.         See Figure 2. CAUTION: 
Do not drill deeper than 1/2" or you may drill 
through console in some areas. Using a small 
chisel, carefully remove the head of the (10) ten 
plastic pins. Unsnap the wiring connector secured to 
clip on trim ring and separate console from trim ring. 
See Fig. 2.          

 
 
 
 

 
 

 
 
 
 
 

 

 

FIGURE 1 

FIGURE 2