Echo SRM-410U Manuel D’Utilisation

1.  Press the decompression device (E).

2. Stop Switch
 

Move stop switch (A) forward away from the STOP position.

3. Purge Bulb
     Pump purge bulb (C) until fuel is visible in the "Clear" fuel return 

line.

4. Recoil 

Lay the unit on a fl at area and keep movable attachment parts clear 
of all obstacles. Hold unit fi rmly and rapidly pull the recoil starter 
handle (D) until the engine fi res.

NOTE
If engine does not start after 5 pulls, use Cold Start Procedure. 

1.  Release throttle trigger and allow to run at an idle speed. 

2.  Slide ignition switch to “STOP” position.