Remington Power Tools M15014AS Manuel D’Utilisation

4

ENGLISH

1.  Read and understand this owner’s manual 

before operating chain saw. 

2.  Watch what you are doing. Use common 

sense. Do not operate saw when you are 
tired. 

3.  Use chain saw for cutting wood only. Do not 

use chain saw for purpose not intended. Do 
not use for cutting plastic, masonry, etc.

4.  Only well-instructed adults should operate 

chain saw. Never allow children to operate 
chain saw.

5.  Use only electrical voltage noted on model 

plate of chain saw.

6.  Use only extension cords marked for outdoor 

use. See Extension Cord Requirements.

7.  Do not operate chain saw

•  while under the influence of alcohol, medi-

cation, or drugs

•  in rain or in damp or wet areas
•  where highly flammable liquids or gases are 

present

•  if saw is damaged, adjusted wrong, or not 

fully and securely assembled

•  if trigger does not turn saw on and off. Chain 

must stop moving when you release trigger. 
Have faulty switch replaced by authorized 
service center (see Technical Service).

•  while in a hurry
•  while in tree or on a ladder unless trained to 

do so 

8.  Wear snug-fitting clothes when operating 

chain saw. Do not wear loose clothing or 
jewelry. They can get caught in moving saw 
chain.

9.  Wear the following safety gear when operating 

chain saw.

• heavy-duty gloves (wear rubber gloves 

when working outdoors)

• steel-toed safety footwear with non-skid 

soles

• eye protection such as safety glasses, 

goggles, or face screen

• safety hard hat
•  ear mufflers or ear plugs
•  hair covering to contain long hair
• face or dust mask (if working in dusty 

areas)

10. Before cutting, always provide the follow-

ing:
• clear work area
• secure footing
•  planned retreat path from falling tree

11. Inspect tree before cutting down. Make sure there 

are no dead limbs or branches that may fall on 
you.

12. To reduce the risk of electric shock, this saw 

has a polarized plug (one blade is wider than 
the other). This plug will fi t in a polarized 
outlet only one way. If the plug does not fi t 
fully in the outlet of your extension cord, 
reverse the plug. If it still does not fi t, a polar-
ized extension cord will be necessary. Do not 
change the plug in any way.

1.  Stay alert. Use common sense while operating 

chain saw.

2.  Keep work area clean. Cluttered areas invite 

injuries.

3.  Be aware of extension cord while operating 

chain saw. Be careful not to trip over cord. 
Keep cord away from chain and operator at 
all times. 

4.  Keep children, animals, and bystanders away 

from chain saw and extension cord. Only 
chain saw user should be in work area. 

5.  Do not cut down a tree unless you are trained 

or have expert help.

6.  If two or more persons perform bucking and 

felling operations at the same time, provide 
plenty of distance between operations. Provide 
distance of at least twice the height of tree 
being felled.

7.  Secure wood you are cutting by using clamps 

or chocks.

8.  Grip chain saw firmly with both hands. Never 

operate chain saw with one hand. Never use 
hand guard as handle.

9.  Keep finger off trigger until ready to make 

cut.