Remington Power Tools M15014AS Manuel D’Utilisation

6

• Do not let guide bar nose touch anything 

when chain is moving (see Figure 1).

•  Never try cutting through two logs at same 

time. Only cut one log at a time.

•  Do not bury guide bar nose or try plunge cut 

(boring into wood using guide bar nose).

•  Watch for shifting of wood or other forces 

that may pinch chain.

•  Use extreme caution when reentering a previous 

cut.

•  Use low-kickback chain and guide bar sup-

plied with this chain saw. Only replace these 
parts with chains and guide bars listed in this 
manual. 

•  Never use dull or loose chain. Keep chain 

sharp with proper tension.

Follow maintenance instructions in this manual. 
Proper cleaning of saw and chain and guide bar 
maintenance can reduce chances of kickback. Inspect 
and maintain saw after each use. This will increase 
the service life of your saw. Note: Even with proper 
sharpening, risk of kickback can increase with each 
sharpening.

1.  Unplug chain saw from power source 

•  when not in use
•  before moving from one place to another
• before servicing
•  before changing accessories or attachments, 

such as saw chain and guard

2.  Inspect chain saw before and after each use. 

Check saw closely if guard or other part 
has been damaged. Check for any damage 
that may affect operator safety or operation 
of saw. Check for alignment or binding of 
moving parts. Check for broken or damaged 
parts. Do not use chain saw if damage affects 
safety or operation. Have damage repaired by 
authorized service center.

3.  Maintain chain saw with care.

•  Never expose saw to rain.
•  Keep chain sharp, clean, and lubricated for 

better and safer performance.

• Follow steps outlined in this manual to 

sharpen chain.

•  Keep handles dry, clean, and free of oil and 

grease.

•  Keep all screws and nuts tight.
•  Inspect power cord often. If damaged, have 

repaired by authorized service center.

1.  Remove all items from carton.
2.  Check all items for any shipping damage. 

If you find any damage or if any parts are 
missing, call Technical Services at 1-800-626-
2237 for prompt service.

•  Never carry chain saw by power cord.
•  Never yank power cord to unplug it.
•  Keep power cord from heat, oil, and sharp 

edges.

•  Inspect extension cords often and replace if 

damaged.

4.  When servicing, use only identical replace-

ment parts.

5.  When not in use, always store chain saw

• in a high or locked place, out of children’s 

reach

•  in a dry place