Scag Power Equipment SWZV Manuel D’Utilisation

SWZV CONTROLS

Before operating the mower, familiarize yourself with all
mower and engine controls.  Knowing the location,
function and operation of these controls is important for
safe and efficient operation of the mower.

1. Ignition Switch (Figure 4-1).  The ignition switch is

used to start the engine.  Manual start engines has two
positions; OFF and ON.  Electric Start engines have
three positions; OFF, ON, and START.

2. Mower Deck Switch (Figure 4-1).  Used to engage

and disengage the mower drive system.  Pulling up on
the switch will engage the deck drive.  Pushing down
on the  switch will disengage the deck drive.

3. Engine Choke Control (Figure 4-1).  Used to start a

cold engine.

4. Engine Throttle Control (Figure 4-1).  Used to

control the engine speed.  Pushing the lever forward
increases engine speed.  Pulling the lever back
decreases engine speed.  Full back position is the
IDLE position.  Full forward is the cutting position.

5. Hourmeter (Figure 4-1).  Indicates the number of

hours the engine has been operated.  It operates
whenever the engine is running.  Has preset
maintenance reminders for engine and hydraulic
system oil changes.  Will start flashing scheduled
maintenance 2 hours before preset time and continue
flashing until 2 hours after. Automatically resets.