Country Home Products A2105BEA Manuel D’Utilisation

1.  From the exterior of the housing, align the 

two square holes on the drift cutter (item 1) 
with the two round holes on the housing. 

2.  From the outside, insert the 5/16" x 5/8" 

carriage bolts (item 2). 

3.  Secure with two flange nuts (item 3). 

4.  Repeat on the other side. 

1.  Select a level surface, turn engine off and 

remove ignition key 

2.  Refer to Figure 5, Page 13.  Remove hairpin 

(item 8) and rotation handle (item 7). 

3.  Refer to Figure 4, Page 12.  Remove the belt 

cover (item 4). 

4.  Refer to Figure 3, Page 12.  Pull the 

tensioner (item 3) to remove the drive belt 
(item 1). 

5.  Refer to Figure 3, Page 12.  Unlock the pin 

(item 6) and carefully remove the DR

®

 ALL-

™

 MOWER from the DR

®

 SNOW 

THROWER.