Teledyne 701 Manuel D’Utilisation

 

01671H (DCN6051) 

1-1 

Teledyne API is pleased that you have purchased the Model 701 (or M701) Zero Air 
System. 
The M701 is an excellent source of clean, dry air for dilution calibrators. It also may be 
used as a source of purge air for permeation tube ovens or burner air for FID analyzers. 
The regenerative, heatless dryer removes water and produces gas with a dewpoint of 
less than -20°C (up to 15 SLPM flow rate) independent of the inlet dewpoint and assists 
in the removal of other gases, greatly increasing the life of the chemical scrubbers. 
The basic M701 includes an oil and diaphragm free pump plus scrubbers to remove 
SO

2

, NO, NO

2

, O

3

 and H

2

S. Optional high performance scrubbers are available to 

remove CO and Hydrocarbons. 
Inlet air is pulled into the pump and routed through a pre-cooler and water trap to 
remove moisture. The air then passes through the Regenerative Dryer for final drying 
and then to the storage tank. 
Tank pressure is monitored and maintained at a preset level by cycling the pump 
automatically as needed, thereby extending both the pump and scrubber life. Outlet air 
then passes through a filter to assure a clean, dry, analytical zero air supply. 
A microcontroller cycles the regenerative dryer and water trap valves to prevent the 
pump from starting against full head pressure. The M701 is an ideal accessory to the 
Model 700E Mass Flow Calibrator or Model 702 Single Point Calibrator as a zero air 
source for analyzers. 
M701 Features: 

  Standard two year warranty 
  Regenerative, heatless dryer for maintenance-free water removal 

independent of inlet dewpoint 

  Long life scrubbers for SO

2

, NO, NO

2

, O

3

, and H

2

S 

  Optional CO or CO and Hydrocarbon scrubber 
  Automatic water drain 
  Automatic pump control based on flow demand 
  May be used to provide combustion air for FID (with HC Scrubber option) 
  Source of purge air for permeation tube ovens 
  Zero air for Ozone Generators