Technics sx-PR604/M Manuel D’Utilisation
Computer Connection
These settings are used to select the mode related to MIDI signal flow when a personal computer is connected to the USB terminal
of this instrument.
of this instrument.
•
When connecting to a personal computer, install the USB driver on the included CD-ROM to the computer first. (Refer to the
separate manual for more information.)
separate manual for more information.)
1.
Turn off the power to this instrument.
2.
Connect a personal computer to the USB ter-
minal on the rear of this instrument.
minal on the rear of this instrument.
3.
Turn on the power to this instrument.
4.
On the MIDI MENU display, select COM-
PUTER CONNECTION.
PUTER CONNECTION.
• The display looks similar to the following.
5.
Use the
∧
and
∨
buttons to select a mode.
NORMAL:
Ordinary mode
PC as master:
The mode which is appropriate for data transmission
PR as master:
The mode when this instrument is used as the master
keyboard.
keyboard.
PR as slave:
The mode when this instrument is used as a slave instru-
ment.
ment.
INTERFACE:
The mode when this instrument is used as a connecting
device between a PC with only USB terminals and an in-
strument with only MIDI terminals.
device between a PC with only USB terminals and an in-
strument with only MIDI terminals.
MID
I
Part XII
MIDI
134
QQTG0665